|
|
Murex Welding Products
Tradesarc
DC150-1 & DC180-1
The Tradesarc DC 150-1 and DC 180-1 will
weld alloyed and non alloyed steel, stainless steel and cast iron using electrodes up to 3.2mm and 4.0mm respectively. The
Tradesarcs are equipment with ArcPlus TM to aid welding characteristics and produce a quality result.
Both machines can be used with an extended mains cable for maximum working range.
|
|
• Practical design makes the power source
easy to carry which enables use
at almost any work site
• Sturdy design - stable construction that
can withstand rough handling
• IP23 - fit for outdoor use which makes it safe on all work sites
• Can
be fitted with extended mains cables
• Reliable, simple and easy to use
• Can weld most metals, from alloyed
and non alloyed steel, stainless steel
and cast iron
• Uses electrodes up to 4.0mm
• Weighs
only 6.9kg (150) and 8kg (180)
• Suitable for scratch start TIG welding |
| Input |
DC150-1 |
DC 180-1 |
Mains Supply
|
230V |
230V |
| Fuse |
16A* |
16A* |
| Output |
|
|
| Welding Range |
4-150A |
5-180A |
| OCV |
60-75V |
60-75V |
| Rating 25% duty cycle |
150A |
180A |
| Rating 35% duty cycle |
140A |
160A | |
| * On 230V supplies a 13A fuse is normally adequate |
| |
| Other relevant data |
Standards
EN60974-1
EN50199
|
Height
280mm |
Width
145mm |
Length
380mm |
Weight
8
kg |
| Ordering Information |
|
Tradesarc DC 150-1 Power Source 459760880
Tradesarc
DC 180-1 Power Source 459760882
Associated Products
MMA Kit 1407721
TIG
Scratch Start Kit 1412652
|
|
|
