
|

|

Murex Welding Products Ltd
ARC EQUIPMENT : MANUAL EQUIPMENT : TIG / MMA Tradestig
DC150-1 & DC200-1

Manufactured around well proven technology, the compact and easily
transportable Tradestig DC150-1 and DC200-1 provide both guaranteed reliability and a quality TIG and MMA weld performance.
For TIG welding, both machines are equipped with HF and LiftArc TM ignition for accurate start procedures and post gas and
slope functions for high quality weld start and finish. For MMA welding, starts are enhanced by automatic hot start or ArcPlus
TM functions which are standard on both machines.
• Sturdy design capable of withstanding tough environments •
Capable of welding most materials in thickness' ranging from 0.5-6mm • Compact and easily transported using the conveniently
located carrying handle • IP23 protection ensures suitability for outdoor use • Two modes of arc initiation,
HF and lift arc • Torch switch latching facility • Multifunction digital display • Timed current
slope and post gas functions • Superb MMA welding characteristics • Packages supplied with Tradestig Power
Source, TIG torch and switch, work return cable, flowmeter and regulator.
Technical data |
DC150-1 |
DC 200-1 |
Mains Supply/Phase
|
230/1 50/60Hz |
230/1 50.60Hz |
Fuse (slow), A at 120A |
16A |
16A |
Mains Cable (mm2) |
2.5 |
4.0 |
Permitted Load at (TIG): |
|
|
25% duty cycle |
|
200A (150A MMA) |
35% duty cycle |
150A |
180A (140A MMA) |
60% duty cycle |
120A |
140A (110A MMA) |
100% duty cycle |
95A |
120A |
Setting range TIG, A |
3-150 |
3-200 |
Setting range MMA, A |
4-150 |
4-150 |
Open circuit voltage, V |
60-75 |
60-75 |
Post Gas, sec |
0-5 |
0.5 |
Slope down, sec |
0-10 |
0-10 |
Enclosure Class |
IP23C |
IP23C |
Application classification |
S |
S |
Standards |
IEC60974-1 EN50199 |
IEC60974-1 EN50199 |
Dimensions |
|
|
LxWxD mm |
380-x180x300 |
380x180x300 |
Weight kg |
8.2 |
8.2 | |
|